Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working one day, it could be due to a dead battery in the coin, water damage the receiver module or a defective electronic chip. Fortunately, all of these are simple to fix and you'll get your car back to normal in no time!
Car keys can also become faulty due to the fact that the blade on the key gets worn. You can easily solve this issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.
Battery
The key fob inside your Peugeot 308 may die or become weak enough to not send a clear signal. This can cause the key fob's function to cease, preventing you from opening and locking the doors or starting your engine. You'll need a new battery for your key fob to correct this.
You'll need to purchase batteries for replacement from an auto parts store or at your local hardware store. Make sure that the battery is brand new and has not on the shelf for too long. A fresh new battery will have more capacity and will also be able to send a stronger signal to the car.
After replacing the battery If you have a new battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors do not unlock it's likely that the issue lies in the car's receiver module which can be programmed by your local Peugeot dealer.
The internal chip of the key fob may also be damaged. This can happen if you drop your key fob on the ground or expose it to water. The rubber seals that shield the chip from moisture may get worn out over time, particularly if your key fob is exposed to water for extended periods of time like submerging it in the ocean at the beach. To avoid this happening, it's essential to protect your key fob from moisture and not let it come into contact with water.
Water Damage
If your key fob is soaked in water, whether you dropped it in the pool or threw it into a puddle don't think it's a loss. The key fob is protected by rubber seals but prolonged exposure to water can harm its electronic chip. Water is a great conductor, and any water that gets inside the key fob will trigger a series short circuits that eventually destroy the electronic chip. After removing the battery clean the contacts with isopropyl ethanol and dry it off completely before putting it back in.
A dead battery could be the reason why your Peugeot 308 won't start. Jumper cables can be a great method to start the engine when you have an additional car. If the battery is the problem and it is not working, it should be replaced.
A poor receiver in the car can also prevent it from receiving the signal from the keyfob. The key fob might be damaged or there might be an issue with the antenna, wiring or the key fob itself. If you have an entirely new key fob, it may require to be programmed to the vehicle. If you are unable solve the issue yourself call a professional technician. A trained technician will be able find the issue quickly and correct it swiftly.
Radio Interference
Interference can trigger symptoms like a key fob that's not recognized or has a narrow range. The interference can be transmitted or radiated which is caused by power and speaker cables that are too close to electrical components. Generally speaking, rerouting cables or moving them away from these components can solve the issue.
It's unlikely that anyone is listening in on the signals from your key fob to steal your car, but it is possible that the signal is being distorted by radio frequency interference. This is an easy issue to repair.
If your keys that are not recognized, try using a fresh battery. Make sure the battery is of the correct size and type. Batteries that aren't the correct size could damage your battery.
Certain alarm systems and radar detectors operate on the same radio frequency as your key fob and could cause them to interfere with your key signals. Do not connect these devices to your key fob.
Pairing Issues
A car's remote keyless entry system has an antenna that receives radio frequency signals from the key fob. peugeot key replacement will not be possible to start your car if this receiver isn't working even if your key fob works and can be reprogrammed. The issue can be caused by a variety of ways, including by a dead coin-cell battery or water damage. The receiver may also be malfunctioning due to an error in the software or internal damage to the key itself.
One of the most frequent reasons that your Peugeot 308 key fob isn't working is that the coin battery inside has gone out of service. It is possible to replace it by a new battery but it's essential to get the right battery for your key fob. It is best to use batteries that are the same size with the same voltage, specifications, and specifications as the original.
Your Peugeot 308 keyfob may not work if it has been connected to an unrelated vehicle. This can happen if have given your key fob to someone else or it has been used to unlock and start other vehicles. This issue can be solved by reprogramming the key fob using an OBDII scan. This tool will usually ask you to provide certain details regarding the vehicle, such as the VIN or engine type, so it's essential to enter this information correctly.